Table of Contents
Advertisement
Troubleshooting
Laundry remains wet at the end of the programme. (*)
• Excessive foam might have occurred and automatic foam absorption system might have been activated due to too much detergent
usage. >>> Use recommended amount of detergent.
Drying process lasts long.
• Pores of the Air inlet filter in front of the machine might be clogged. >>>
• The Air inlet filter in front of the machine might be blocked. >>>
filter.
• Ventilation may be inadequate due to the very small area of installation. >>>
ambient temperature.
• Excessive laundry was loaded in. >>>
• Laundry may not have been spun adequately. >>>
Open the taps.
• Tap is turned off. >>>
Laundry remains wet at the end of drying.
• Improper programme might have been used for the laundry type >>>
the maintenance tags on the clothes or use time programmes additionally.
• Pores of the Air inlet filter in front of the machine might be clogged. >>>
• Excessive laundry was loaded in. >>>
• Laundry may not have been spun adequately. >>>
Machine does not turn on or the programme does not start.
• Power cable might not be plugged in. >>>
• Programme might not be set or Start / Pause / Cancel button might not be pressed. >>>
machine is not in Pause mode.
• Child lock might be enabled. >>>
Laundry is shrunk, yellowed, felted or damaged.
• Improper programme might have been used for the laundry type >>>
the maintenance tags on the clothes or use time programmes additionally. Laundry not suitable for drying should not be dried.
Drying cannot be performed
• Laundry might not be dry or drying function has not been enabled. >>>
programme.
Loading door cannot be opened.
• Loading door of the machine may not be opened due to safety reasons. >>>
will keep the loading door locked for your safety until it cools down. You can accelerate cooling by running any 10-minute drying
programme.
(*) Machine does not switch to spinning step when the laundry is not evenly distributed in the drum to prevent any damage to the machine and to its
surrounding environment. Laundry should be rearranged and re-spun.
(**) Regular drum cleaning is not applied. >>>
CAUTION
A
If you cannot eliminate the problem although you follow the instructions in this section, consult your dealer or the Authorized
Service Agent. Never try to repair a nonfunctional product yourself.
36 / EN
Remove everything, if any, that is blocking ventilation in front of the Air inlet
Do not overload the Washer-Dryer.
Have the Washer-Dryer perform spin in a higher spin speed during washing step.
Do not overload the Washer-Dryer.
Have the Washer-Dryer perform spin in a higher spin speed during washing step.
Make sure that the power cable is plugged in.
Deactivate the Child Lock.
Clean the drum regularly. See, 6.2
Wash the Air inlet filter with lukewarm water.
Open the doors and windows to avoid too much increase in the
Select a proper programme for the type of the laundry by checking
Wash the Air inlet filter with lukewarm water.
Make sure that the program has been set and the
Select a proper programme for the type of the laundry by checking
Check if drying function is also selected after the selected washing
If "wait to cool down to open...." warning is displayed, machine
Washer-Dryer
Advertisement
Table of Contents
