Table of Contents
Advertisement
Operating the product
NOTE
¾ Do not use liquid detergents when you activate End Time function! There is the risk of staining of the clothes.
C
¾ Loading door remains locked during the End Time countdown period. Machine must be switched to Pause mode by
pressing the Start/Pause button to open the loading door. At the end of the countdown, End Time indicator turns off,
washing cycle starts and the time of the selected programme appears on the display.
¾ When the End Time selection is completed, the time appearing on the screen consists of end time plus the duration of
the selected programme.
5.15 Starting the programme
60
o
C
PROGRAM STARTS
1200
88:88
1. Press Start / Pause button to start the programme.
2. The Start / Pause button which was flashing starts to illuminate steadily now, indicating that the programme has started. "Program
started" appears on the display for "3" seconds.
3. Loading door is locked. "Door is Closing" appears on the display when the door is being locked.
5.16 Loading door lock
DOOR IS LOCKED
There is a locking system on the loading door of the machine that prevents opening of the door in cases when the water level is unsuitable.
"Door is Locked" appears on the display when the loading door is locked.
5.17 Changing the selections after programme has started
5.17.1 Adding laundry after the programme has started:
60
o
C
DOOR OPENING
1200
88:88
If the water level in the machine is suitable when you press Start / Pause button, "Door is opening" will appear on the display.
If the water level in the machine is not suitable when you press Start / Pause button, the display will show that the loading door is locked.
5.17.2 Switching the machine to pause mode:
60
o
C
PAUSE
1200
88:88
Press the Start / Pause button to switch the machine to pause mode. The frame around the Start / Pause button starts flashing. "Pause"
appears on the display.
5.17.3 Changing the programme selection after programme has started:
The programme change is not allowed when the current programme is running.
If you turn the Programme Selection knob while the programme is running, "Pause to make changes" appears on the display.
You can select the new programme after switching the current programme to pause.
C
NOTE
¾ The selected program starts anew.
5.17.4 Changing the auxiliary function, speed and temperature settings
Depending on the step the programme has reached, you can cancel or activate the auxiliary functions; see, "Auxiliary function selection".
You can also change the speed, temperature and drying settings; see, "Spin speed selection" and "Temperature selection".
26 / EN
Washer-Dryer
Advertisement
Table of Contents
