Table of Contents
Advertisement
Installation
3.7 Adjusting the feet
1
CAUTION
A
¾ In order to ensure that the product operates more silently and vibration-free, it must stand level and balanced
on its feet. Balance the machine by adjusting the feet. Otherwise, the product may move from its place and
cause crushing and vibration problems.
1 Loosen the nuts on the feet in the direction of arrow with the tool supplied in the User Manual bag.
2 Adjust the feet until the product stands level and balanced. You can move the feet downwards by turning them counterclockwise or
upwards by turning clockwise.
3 Tighten all lock nuts again in the direction of arrow by the tool supplied. You can move the nuts upwards by turning them counterclockwise
or downwards by turning clockwise.
3.8 Electrical connection
Connect the product to a grounded outlet protected by a 16 A fuse. Our company shall not be liable for any damages that will arise when the
product is used without grounding in accordance with the local regulations.
• Connection must comply with national regulations.
• Power cable plug must be within easy reach after installation.
• If the current fuse or circuit breaker is less than 16 Amperes, please have a qualified electrician install a 16 Ampere fuse or circuit
breaker.
• The voltage specified in the "Technical specifications" section must be equal to your mains voltage.
DANGER
B
¾ Damaged power cables must be replaced by the Authorized Service Agents.
3.9 Transportation of the product
1 Unplug the product before transporting it.
2 Remove water drain and water supply connections.
3 Drain all water that has remained in the product. See. 6.6
4 Install transportation safety bolts in the reverse order of removal procedure; see 3.3.
DANGER
¾ The weight of your product is not suitable to be carried by one person.
¾ The product is heavy; it should be carried by two persons very carefully on the stairs. Falling of your
product on you may cause disabilities.
CAUTION
A
¾ Packaging materials are dangerous to children. Keep packaging materials in a safe place away from reach of
the children.
C
NOTE
¾ Never move the product without the transportation safety bolts properly fixed in place!
10 / EN
2
3
Washer-Dryer
Advertisement
Table of Contents
