Fisher & Paykel OR90SDBSIPX Installation Instructions And User Manual page 60

Freestanding cooker
Table of Contents

Advertisement

Troubleshooting
58
Troubleshooting chart
Problem
Pans do not become hot
and
appears in the
display.
The fan comes on when I
select the Light function
.
The oven door does not
open after a Self Clean
cycle.
12.00
The display shows
and I cannot open the
oven door or adjust the
time.
The display shows Fdor
The display shows Fdor
when I do a test Self
Clean after removing the
door for cleaning.
I replaced the door after
cleaning but it does not
shut properly.
Possible causes
The cooktop cannot detect the
pan because it is not suitable for
induction cooking.
The cooktop cannot detect the
pan because it is too small for
the cooking zone or not
properly centred on it.
This is normal.
The oven is too hot for the door to be
opened safely.
When the oven has cooled to a safe temperature the door will
automatically unlock and the door lock indicator will go out.
There has been a power interruption during a Self Clean cycle.
When the power is restored the door will remain locked until the
oven has cooled to a safe temperature.
When the oven has cooled the door will unlock and the display
12.00
will flash
.
You can then reset the clock and use the
oven.
The door has not shut completely (Self clean function) or the Self
Clean function has failed.
Close the door firmly and try re-starting the Self Clean cycle.
If the display still shows 'Fdor' try turning off the oven at the
wall. If the error persists when you turn it back on, call Customer
Care or your Authorised Service Centre
The door has been incorrectly replaced after cleaning. Remove
and replace the door and retest. It the error still persists call
Customer Care or your Authorised Service Centre.
The door lock is obstructing the door.
Remove and replace the door again. If this does not help, call
Customer Care or your Authorised Service Centre.
What to do
Use cookware suitable for
induction cooking. See
section 'Choosing the right
cookware' .
Centre the pan and make
sure that its base matches
the size of the cooking
zone.

Advertisement

Table of Contents
loading

Table of Contents