Table of Contents
Advertisement
Care and cleaning
40
Cleaning the inside of your oven
Note: if using the Self Clean function remove all shelves and side racks first. See 'Using the Self
Clean function' .
Do not use abrasive cleaners, cloths or pads to clean the enamel.
Removing the side racks
Using a small coin or a flat-head screwdriver, loosen and remove the front fixing screw only.
1
Slide the side rack clear of the rear lock stud and remove.
2
Refitting the side racks
Slide the side rack gently so it engages with the rear lock stud. Make sure that they are the right
3
way up, as in the illustrations, and then insert and tighten the front fixing screw.
If not already fitted, fit the telescopic sliding shelf supports. See "Care and cleaning' for
4
instructions.
Fig. 24 Removing the side racks
Advertisement
Table of Contents
