Maintenance Menu - Oki B840n User Manual

ITEM
HUB LINK SETTING
FACTORY DEFAULTS
M
AINTENANCE MENU
This menu provides access to various printer maintenance functions.
ITEM
MENU RESET
SAVE MENU
POWER SAVE
SLEEP
USB HOST POWER
PAPER BLACK SET
TRNSPR BLACK SET
DARKNESS
SMR SETTING
BG SETTING
DEFAULT
AUTO NEGOTIATE
EXECUTE
DEFAULT
EXECUTE
EXECUTE
ENABLE
ENABLE
OFF
0
0
0
0
0
Menu functions > 26
REMARKS
Sets full or half duplex for communication via a
network hub.When AUTO is set, negotiation is done
automatically.
Reloads the settings present when the unit was setup
by the manufacturer.
REMARKS
Resets menus to default settings.
Saves the current menu settings. The last menu
executed is saved and the menu previously saved is
overwritten and erased.
When you press the ENTER button, the following
confirmation message is displayed.
ARE YOU SURE? YES/NO
If you select NO, the display returns to the previous
menu.
If you select YES, the current menu settings are
stored and the menu is exited.
Enables or disables automatic power save mode.
Delay before entering this mode is set in the SYS
CONFIG MENU.
Sets Enable/Disable of Sleep Mode.
Sets power supply for USB-HOST of the whole
power save mode.
When Off, suppress power supply.When On, do
normal power supply.
Used for small adjustments when you experience
faded print or light specks / streaking in
monochrome printing on white paper. Select a
higher value to reduce fading, or a lower value to
reduce specks or streaking in high density print
areas.
As above but for mono printing on transparencies.
Adjusts the darkness setting. Normal setting is 0.
Sets a correction value for uneven print quality, to
correct print variations caused by variations in
temperature and humidity or in print density/
frequency.
Sets a correction value for dark-coloured paper
printing, to correct print variations caused by
variations in temperature and humidity or in print
density/frequency.