Sys Config Menu - Oki B840n User Manual

ITEM
MPT PAPERSIZE
MPT MEDIATYPE
MPT MEDIAWEIGHT
UNIT OF MEASURE
S
YS CONFIG MENU
This menu adjusts general printer settings to suit the way you prefer to work.
ITEM
POW SAVE TIME
SLEEP TIME
PERSONALITY
PARA PS-PROTOCOL
USB PS-PROTOCOL
NET PS-PROTOCOL
CLRABLE WARNING
AUTO CONTINUE
MANUAL TIMEOUT
WAIT TIMEOUT
TIMEOUT LOCAL
TIMEOUT NET
DEFAULT
A4 LEF
PLAIN
MEDIUM
MILLIMETER
DEFAULT
1 MIN
10 MIN
AUTO EMULATION
ASCII
RAW
RAW
ONLINE
OFF
60 SEC
40 SEC
40 SEC
90 SEC
Menu functions > 20
REMARKS
Selects the size of paper to be fed from the multi
purpose tray. For CUSTOM setting see X-
DIMENSION and Y-DIMENSION in "Print menu" on
page43.
Selects the type of media to be fed from the multi
purpose tray so that the printer can adjust its
internal parameters to better accommodate the
selected type of media.Note: USERTYPEn are
displayed only if registered in the host PC/Server.
Selects the media weight to be fed from the multi
purpose tray.
Selects the unit of measure.
REMARKS
Adjusts the idling time before the printer
automatically switches into power saving mode. In
this mode power consumption is reduced to a low
level required to just keep the printer operating and
ready to receive data. When a job is sent the printer
will require a warm-up time of up to 1 minute before
printing can begin.
Adjusts the power saving time before the printer
automatically switches into sleep mode.
This item selects which industry standard emulation
your printer should use. When set to AUTO, incoming
data is examined and the correct emulation is
automatically selected each time a print job is
received.
Selects PostScript data format for parallel port.
Selects PostScript data format for USB port.
Selects PostScript data format for network port.
When ONLINE, non-critical warnings, such as
requests for a different paper size, can be cleared by
pressing the ON LINE button. When set to JOB, they
are cleared when the print job resumes.
Determines whether or not the printer will
automatically recover from a memory overflow
condition.
Specifies how many seconds the printer will wait for
paper to be fed before cancelling the job.
Specifies how many seconds the printer will wait
when received data pauses before forcing a page
eject. In PostScript Emulation mode the job will be
cancelled if timeout occurs.