Ppr Emulation - Oki B840n User Manual

ITEM
TRAY ID#
PCL T0ID
PCL T1ID
PCL T2ID
PCL T3ID
PPR E
MULATION
This menu controls the printer's PPR emulation.
ITEM
CHARACTER PITCH
FONT CONDENSE
CHARACTER SET
SYMBOL SET
LETTER O STYLE
ZERO CHARACTER
LINE PITCH
WHITE PAGE SKIP
CR FUNCTION
LF FUNCTION
LINE LENGTH
FORM LENGTH
TOF POSITION
LEFT MARGIN
FIT TO LETTER
TEXT HEIGHT
CONT PAPER MODE
DEFAULT
4
1
5
20
DEFAULT
10 CPI
12CPI to 20CPI
SET-2
IBM-437
DISABLE
NORMAL
6 LPI
OFF
CR
LF
80 COLUMN
11.7 INCH
0.0INCH
0.0INCH
DISABLE
SAME
OFF
Menu functions > 22
REMARKS
Sets the # to specify the MP tray for the paper feed
destination command (ESC&l#H) in PCL5e emulation.
Sets the # to specify Tray 1 for the paper feed
destination command (ESC&l#H) in PCL5e emulation.
Sets the # to specify Tray 2 for the paper feed
destination command (ESC&l#H) in PCL5e emulation.
(Displayed only if Tray 2 is installed).
Sets the # to specify Tray 3 for the paper feed
destination command (ESC&l#H) in PCL5e emulation.
(Displayed only if Tray 3 is installed).
REMARKS
Specifies character pitch in IBM PPR emulation.
Specifies 12CPI pitch for Condense Mode.
Specifies a character set.
Specifies a symbol set.
Specifies the style that replaces 9BH with letter o
and 9DH with a zero
Sets the zero to be slashed or unslashed.
Specifies the line spacing.
Selects whether blank pages are printed or not.
Selects whether a received carriage return character
(0Dh) also causes a line feed.
Selects whether a received line feed character (0Ah)
also causes a carriage return.
Specifies the number of characters per line.
Specifies the length of paper.
Specifies the distance of print from the top edge of
the paper.
Specifies the distance of print from the left hand
edge of the paper.
Sets the printing mode that can fit print data,
equivalent to 11 inches (66 lines), in the LETTER-
size printable area.
Sets the height of a character.
SAME: Regardless of CPI, same height
DIFF: As CPI, character heights vary.
Sets printer for using continuous feed stationery.