Table of Contents
Advertisement
FX E
MULATION
This menu controls the printer's FX emulation.
ITEM
CHARACTER PITCH
CHARACTER SET
SYMBOL SET
LETTER O STYLE
ZERO CHARACTER
LINE PITCH
WHITE PAGE SKIP
CR FUNCTION
LINE LENGTH
FORM LENGTH
TOF POSITION
LEFT MARGIN
FIT TO LETTER
TEXT HEIGHT
CONT PAPER MODE
P
ARALLEL MENU
This menu controls the operation of the printer's parallel data interface.
ITEM
PARALLEL
BI-DIRECTION
ECP
ACK WIDTH
ACK/BUSY TIMING
I-PRIME
OFFLINE RECEIVE
1. If the centronics (parallel) port is enabled, the product is no longer Energy Star compliant.
DEFAULT
10 CPI
SET-2
IBM-437
DISABLE
NORMAL
6 LPI
OFF
CR
80 COLUMN
11.7 INCH
0.0INCH
0.0INCH
DISABLE
SAME
OFF
DEFAULT
DISABLE
ENABLE
ENABLE
NARROW
ACK IN BUSY
DISABLE
DISABLE
Menu functions > 23
REMARKS
Specifies character pitch in this emulation.
Specifies a character set.
Specifies a symbol set.
Specifies the style that replaces 9BH with letter o and 9DH
with a zero
Sets the zero to be slashed or unslashed.
Specifies the line spacing.
Selects whether blank pages are printed or not.
Selects whether a received carriage return character (0Dh)
also causes a line feed.
Specifies the number of characters per line.
Specifies the length of paper.
Specifies the distance of print from the top edge of the
paper.
Specifies the distance of print from the left hand edge of the
paper.
Sets the printing mode that can fit print data, equivalent to
11 inches (66 lines), in the LETTER-size printable area.
Sets the height of a character.
SAME: Regardless of CPI, same height
DIFF: As CPI, character heights vary.
Sets printer for using continuous feed stationery.
REMARKS
Enables or disables the parallel port.
ENABLE/DISABLE the bi-directional capability of the
parallel interface.
Extended Capabilities Port, enables/disables this function.
Sets ACK width for compatible reception.
Sets the order to output the BUSY and ACK signal for
compatible reception.
Sets time to enable/disable I-prime signal
To Enable/disable of this function. When set to Enable, the
interface retains a receive possible state even when
switching to Offline. Interface sends the BUSY signal only
when the receive buffer is full or a service call occurs.
1
Advertisement
Table of Contents
