Kenwood DDX635WBT Instruction Manual page 55

CONNECTION/INSTALLATION
Connection
❏ Connecting wires to terminals for Toyota Cars
USB terminal:
Pages 56 – 57
Page 57
Connect the antenna
cord to the antenna
terminal.
1
*
Blue with white stripe
(Power control wire)
Brown (Mute control wire)
* If no connections are made, do not let the cable come out from the tab.
5
Page 57 Page 57 Pages 56 – 57
When using the optional power amplifier, connect to
its power control terminal.
Not used.
Connect to vehicle's harness.
Connect to vehicle's harness.
C6 C7 C8
Purple with white stripe
(Reverse sensor wire)
10 A fuse
Pin Color and functions of Connector A, B, and C
A1 Orange/White
A2 Yellow
A4 Red
A5 Blue
A6 Black
A8/A7 White ª / White/Black ·
A10/A9 Gray ª / Gray/Black ·
B2/B1 Green ª / Green/Black ·
B6/B5 Purple ª / Purple/Black ·
C6 Gray/Red
C7 Light green/Red
C8 Purple/Red
Connect to the vehicle's steering remote harness.
• Depending on the type of vehicle, it cannot be
connected.
Connect to the vehicle's reverse lamp harness when
using the optional rear view camera.
Connect to the vehicle's parking
2
brake detection switch harness.
• For best safety, be sure to
connect the parking sensor.
Dimmer
Battery
Ignition (ACC)
Antenna control
Ground connection
Left speaker (front)
Right speaker (front)
Left speaker (rear)
Right speaker (rear)
Ground
Input 1
Input 2
ENGLISH 55