Xerox DocuPrint 92C NPS Troubleshooting Manual page 50

ADJUSTING PRINT QUALITY AND PERFORMANCE
Measuring performance
6-2
Access level Administrator or operator
Syntax PQA
Arguments None
Example Manually running a PQA
PS–op>pqa
DocuPrint manual PQA submitted as document number: (N)
You can use the DocuPrint sequencer log file to calculate print
performance. Although a stopwatch is the recommended method for
obtaining sustained throughput print speeds, the sequencer log can
be used to calculate speeds that include the start-up latency
associated with the printer. This section describes how to calculate
speeds using the sequencer log and how to minimize the start-up
latency in your calculations.
Note: The sustained throughput using a stopwatch is a better
measurement of the speed of the job since the several seconds of
start-up time do not need to be measured.
Example Refer to the following example when reading "Calculating
throughput." The Show Log command in this example displays a
menu of logs with the current sequencer log named DocuPrint
sequencer:
XEROX DOCUPRINT 92C NPS TROUBLESHOOTING GUIDE