Product Specifications - UNICOM FEP-32008T-3 User Manual

Product Specifications

Standard
Compliance:
Portocol:
Transfer Rate:
Connector:
MAC Address:
Memory Buffer:
LED Indicator:
Network Cable:
Dimension:
Operating Temp:
Operating Humidity:
Power Supply:
Power Consumption:
EMI:
FCC Statement
This equipment has been tested and found to comply with the limits for a class B
device, pursuant to part 15 of the FCC rules. These limits are designed to provide
reasonable protection against harmful interference in a commercial installation.
This equipment generates, uses and can radiate radio frequency energy and, if not
installed and used in accordance with instructions, may cause harmful
interference with radio communications. Operation of this equipment in a
residential area is likely to cause harmful interference, in which case, the user will
be required to correct the interference at the user's expense.
IEEE 802.3 10Base-T Ethernet
IEEE 802.3u 100Base-TX Fast Ethernet
IEEE 802.3x Flow Control
CSMA/CD
14,880 pps for 10Mbps
148,800 pps for 100Mbps
RJ 45
Auto MDIX on all ports
1K Mac address table
768KBits
Per port: Link/Activity
Per unit: Power
10Base-T: 2-pair UTP Cat. 3,4,5e cable
(100m), EIA/TIA-568 100-ohm STP (100m)
100Base-T: 2-pair UTP Cat. 5e cable (100m),
EIA/TIA-568 100-ohm STP (100M)
137mm x 74mm x 24mm (W x D x H)
0℃ to 45℃ (32℉ to 113℉)
10% to 90% (Non-condensing)
External power supply
DC 9V, 700mA
5.8 Watt @ AC 240V/60Hz (Maximum)
FCC Class B
CE
6