Dehumidifying Operation - Hitachi RAS-D10CDK Instruction Manual

DEHUMIDIFYING OPERATION

Use the device for dehumidifying when the room temperature is over 1 ° C.
When it is under 1 ° C, the dehumidifying function will not work.
Dehumidifying Function
When the room temperature is higher than the temperature setting: The device will dehumidify the room,
reducing the room temperature to the preset level.
When the room temperature is lower than the temperature setting: Dehumidifying will be performed at the
temperature setting slightly lower than the current room temperature, regardless of the temperature setting. The
function will stop (the indoor unit will stop emitting air) as soon as the room temperature becomes lower than
the setting temperature.
1
Press the
1 Press the
The FAN SPEED is set at LOW automatically.
The FAN SPEED button does not work.
Set the desired room temperature with the TEMPERATURE
2 button (the display indicates the setting).
2
˚ C
STOP
STOP Press the
with a beep. Press the
As the settings are stored in memory in the remote controller, you only
■
have to press the
-  -
(DEHUMIDIFY) button.
(DEHUMIDIFY) button.
The range of 0- ° C is recommended as the
room temperature for dehumidifying.
(DEHUMIDIFY). Dehumidifying operation starts
(STOP) button to stop operation.
(DEHUMIDIFY) button next time.