Table of Contents
Advertisement
setup screen
NETWORK SETUP
Interface
1.
From the Setup menu, select the
<Network (
2.
Click <Interface>.
3.
Set the <Interface> and <IPv6 setup>
as necessary.
•
IP type : Select an IP connection type.
-
Manual : Specify the IP address,
Subnet mask, Gateway, DNS1,
and DNS2.
-
DHCP : Specify the DNS1 and
DNS2.
-
PPPoE : Specify the DNS1, DNS2,
Name and Password.
If you set it to <Manual>, you should specify the IP, Subnet mask, Gateway, DNS 1 & 2 manually.
•
MAC address : Shows the MAC address.
•
IP address : Displays the current IP address.
•
Subnet mask : Displays the <Subnet mask> for the set IP.
•
Gateway : Displays the <Gateway> for the set IP.
•
DNS1/DNS2 : Displays the DNS(Domain Name Service) server address.
•
IPv6 use : Specify the use of IPv6.
•
Default IPv6 Address : Obtains the IPv6 address to access the IPv6 network.
-
Use Default Address Only : Use only the default IPv6 address.
-
Obtain IP address via DHCP : Display and use the IPv6 address obtained from
the DHCP server.
-
Use the following IP Address : Enter an IP address manually and use it.
J
Select only one from three types of address.
4.
When done, click [Apply (
J
The IP addressing system will be defaulted to DHCP. If no DHCP server is found, the previous
settings will be restored automatically.
56_ setup screen
)> tab.
)].
Advertisement
Table of Contents
