Table of Contents
Advertisement
setup screen
EVENT SETUP
FTP / E-mail
You can configure the FTP/E-mail server settings so that you can transfer the images
stored in the camera to your PC if an event occurs.
1.
From the Setup menu, select the
<Event (
2.
Click <FTP / E-mail>.
3.
Select <FTP configuration> or
<E-mail configuration> and enter /
select a desired value.
•
FTP configuration
-
Server address : Enter the IP
address of the FTP server that you
transfer the alarm images to.
-
User ID : Enter the user ID with
which you will log in to the FTP
server.
-
Password : Enter the user account password for logging into the FTP server.
-
Upload directory : Specify the FTP path where you will transfer the alarm
images.
-
Port : The default port of the FTP server is 21; however, you can use a different
port number according to the FTP server settings.
-
Passive mode : Select <On> if you need to connect in passive mode due to the
firewall or the FTP server settings.
•
E-mail configuration
-
Use SSL : Specify the use of SSL.
-
Server address : Enter the IP address of the email server that you use for the
email transfer.
ex) smtp.hotmail.com
-
Use authentication : Select whether to use authorization.
-
User ID : Enter the user ID for logging into the email server.
-
Password : Enter the user account password for logging into the email server.
-
Port : The default port of the email server is 25; however, you can use a different
port number according to the email server settings.
-
Recipient : Enter the address of the email recipient.
62_ setup screen
)> tab.
Advertisement
Table of Contents
