Table of Contents
Advertisement
By attaching the ultra microfi ber mop, you can
effectively use the Robot Cleaner to remove dust.
When the mop plate is attached, the Robot Cleaner
will not climb on to carpets or over thresholds, in
order to prevent transferring dirt from the mop.
For mop cleaning, mount the mop and mop plate to the Robot Cleaner according to the following instructions:
1. Attach the ultra microfi ber mop to the Velcro
of the mop plate as shown in the fi gure.
2. Firmly push the Mop Plate into the furrows
until you hear a 'click' sound.
※ Note that, if the Mop Plate is not secured
correctly, it may separate during the
cleaning.
3. It is essential that the fi xing hooks on the Mop
Plate align correctly on to the fi xing grooves
on the underside of the cleaner.
Tip
• To avoid odors, wash any foreign material or dust off the mop after cleaning is complete.
• To avoid staining floors, do not use the ultra microfiber mop to clean when dirt is mixed with
liquids such as coffee or ink.
• To avoid damage to carpets from the Velcro or dirt transfer from the mop, do not clean the
carpet while the mop plate or mop is attached.
• Keep the ultra microfiber mop dry. Do not use it on wet surfaces.
If there is moisture, it can interfere with the navigation.
• Smart Diagnosis feature is not available, when the Mop Plate is attached.
• Some models may not come with Microfibre Mop or Mop Plate.
MOP CLEANING (OPTION)
Fixing hook
Caution
Do not cover the bottom camera
sensor by mop.
"Click!"
"Click!"
Fixing groove
21
Advertisement
Table of Contents
