ADTRAN Total Access 1240 Installation And Maintenance Practice page 141

Table B-5. LocSTULineProvisioning (Continued)
Column Option
7 Annex
8 LineProbing
9 Repeater Mode
A M-pair Mode
B Number of Pairs (Mpair mode
only)
C Valid Data Slots (Mpair mode
only)
D Min Line Rate
E Max Line Rate
F Current Line Rate
10 Min Sub Rate
11 Max Sub Rate
12 PMMS Margin CC
13 PMMS Margin WC
14 Clock Mode
15 Framing Mode
16 F-bit notifications
61179605L5-5B
Appendix B, SCA File Format - SCA Format
Values
0 = A
1 = B
2 = A/B
0 = Disabled
1 = Enabled Current Condition
2 = Enabled Worst Case
0 = Terminator
1 = Repeater
0 = 2-wire
1 = 4-wire
2 = Mpair
2 pairs ONLY
Bit-wise representation of the ports to be physically
bonded:
bit 0 - pair 1
bit 1 - pair 2
bit 2 - pair 3 (NOT VALID)
bit 3 - pair 4 (NOT VALID)
N = 3 to 36, where rate = N × 64k + 8k
N = 3 to 36, where rate = N × 64k + 8k
N = 3 to 36, where rate = N × 64k + 8k
N = 0 to 7, where rate = Line Rate + (N × 8k)
N = 0 to 7, where rate = Line Rate + (N × 8k)
–10dB to 20dB
–10dB to 20dB
0 = Plesio
1 = Plesio w/Reference
2 = Sync
3 = Sync Hybrid
0 = Frame Plesio
1 = Frame Sync
2 = Frame Transparent
bit 3 = segment defect: 1 = normal, 0 = segd alarm
bit 2 = power status: 1 = normal, 0 = rem loss of power
bit 1 = segment anomaly: 1 = normal, 0 = sega alarm
bit 0 = loss of signal: 1 = normal, 0 = loss of signal
B-5