Getting Started - JVC KD-R646 Instruction Manual

GETTING STARTED

1
Cancel the demonstration
1
Press and hold MENU.
2
Press the volume knob to select [DEMO].
3
Turn the volume knob to select [DEMO OFF], then press the knob.
4
Press MENU to exit.
2
Set the clock
1
Press and hold MENU.
2
Turn the volume knob to select [CLOCK], then press the knob.
3
Turn the volume knob to select [CLOCK SET], then press the knob.
4
Turn the volume knob to select the day, then press the knob.
5
Turn the volume knob to adjust the hour, then press the knob.
6
Turn the volume knob to adjust the minute, then press the knob.
7
Press MENU to exit.
3
Set the basic settings
1
Press and hold MENU.
2
Turn the volume knob to make a selection, then press the knob.
• See the following table for selection.
3
Press MENU to exit.
To return to the previous hierarchy, press G.
CLOCK
CLOCK DISP ON: The clock time is shown on the display even when the unit is turned off. ;
OFF: Cancels.
DIMMER
DIMMER SET Selects the display and button illumination adjusted in the [BRIGHTNESS] setting.
AUTO: Changes between the day and night adjustments when you turn off or on the car
1
headlights. * ; ON: Selects the night adjustments. ; OFF: Selects the day adjustments.
BRIGHTNESS Sets the display and button brightness for day and night separately.
1 DAY/ NIGHT: Select day or night.
2 BUTTON ZONE/ DISP ZONE: Select the zone for setting.
3 Set the brightness level (00 to 31). (Default: DAY: 31 ; NIGHT: 15)
DISPLAY
2
SCROLL * ONCE: Scrolls the display information once. ; AUTO: Repeats scrolling at 5-second
intervals. ; OFF: Cancels.
TAG DISPLAY ON: Shows the TAG information while playing MP3/WMA files. ; OFF: Cancels.
3
IPOD SWITCH * : For KD-R646 only
HEAD MODE: Controls music playback only from this unit. ; IPOD MODE: Controls music
playback from both the unit and iPod/iPhone. ; EXT MODE: Controls music playback only
from the iPod/iPhone.
SRC SELECT
4
AM * ON: Enables AM in source selection. ; OFF: Disables.
SW1 * 4
ON: Enables SW1 in source selection. ; OFF: Disables.
4
SW2 * ON: Enables SW2 in source selection. ; OFF: Disables.
4
AUX * ON: Enables AUX in source selection. ; OFF: Disables. ; BT ADAPTER: Select when the
KS-BTA100 Bluetooth adapter is connected to the AUX jack (➜ 7). The source name will
change to BT AUDIO.
* 1
The illumination control wire connection is required. (➜ 13)
*
2 Some characters or symbols will not be shown correctly (or will be blanked).
* 3 Displayed only when the source is USB-IPOD.
* 4
Not displayed when the corresponding source is selected.
4
Default: XX