Bosch HMV 8051 U Installation Instructions Manual page 21

m
li2 mm)l (152 mm) (152 mm)
1_ 6. = _ 6, = !
oo ooo,oooooooooo
oooooooooooTooo_oooooo
6. Using a saber or keyhole saw, cut out this area through the rear wall.
Adapting microwave blower 1. Remove and save the screws holding the blower motor and the blower plate. Lift
up the blower plate and put it aside.
2. Carefully pull out the blower unit and rotate 90 ° so that fan blade openings are
facing out the top of the microwave
3. Rotate the blower unit counterclockwise 180 °.
4. Gently remove the wires from the grooves. Reroute the wires through the
grooves on other side of the blower unit. Rotate blower unit 90° so that fan blade
openings are facing out the back of the microwave.
22