What To Do If - Electrolux ESL 66010 User Manual

Consumption values
Programme
Intensive
Automatic
Quick
Economy
Prewash
1) The digital display shows the programme duration.
The pressure and temperature of the
water, the variations of power supply

What to do if...

The appliance does not start or stops during
operation.
If there is a fault, first try to find a solution to
the problem yourself. If you cannot find a sol-
ution to the problem yourself, contact the
Service Force Centre.
Fault code and malfunction
• intermittent audible signal
• digital display shows
The dishwasher does not fill with wa-
ter
• intermittent audible signal
• digital display shows
The dishwasher will not drain
• intermittent audible signal
• digital display shows
The anti-flood device operates
Duration (in minutes)
-
-
-
-
-
• The water tap is blocked or furred with limescale.
Clean the water tap.
• The water tap is closed.
Open the water tap.
• The filter in the water inlet hose is blocked.
Clean the filter.
• The connection of the water inlet hose is not correct. The
hose can be kinked or squashed.
Make sure that the connection is correct.
• There is a blockage in the sink spigot.
Clean the sink spigot.
• The connection of the water drain hose is not correct. The
hose can be kinked or squashed.
Make sure that the connection is correct.
• Close the water tap and contact your local Service Force
Centre.
1)
Energy (in kWh)
1,8 - 2,0
1,1 - 1,7
0,9
1,0 - 1,1
0,1
and the quantity of dishes can change
these values.
Caution! Switch off the appliance
before you do the below suggested
corrective actions.
Possible cause and solution
electrolux 15
Water (in litres)
23 - 25
12 - 23
9
12 - 13
4