Table of Contents
Advertisement
Ceiling mount bracket safeguards
Specifications
Dimensions
Ceiling mount bracket safeguards
Installation work of the ceiling mount bracket should only be carried by a qualified technician.
z
Even if it is during guaranteed period, the manufacturer is not responsible for any hazard or damage caused
z
by using a ceiling mount bracket which is not purchased from an authorized distributors, or environmental
conditions.
Remove an unused ceiling mount bracket promptly.
z
Ensure to use a torque driver and do not use an electrical screwdriver or an impact screwdriver.
z
For details, see the work instruction manual packed together with the ceiling mount bracket.
z
The model Nos. of the accessories and the parts sold separately are subject to change without notice.
z
Make sure the screws on the ceiling mount kit cannot touch the metal parts materials (metallic lath, wire or
z
board) in the ceiling board. Otherwise it may result in fire hazard.
Bottom view
70
- ENGLISH
349.0（13.74"）
172.4 (6.79")
:
Actual dimension may differ by product.
Model No. of ceiling mount bracket:
ET-PKV100H (for high ceilings)
ET-PKV100S (for low ceilings)
Model No. of projector mount base:
ET-PKL100B
M4 x 0.7
10 mm (0.39")
.
Torque:1.2 ± 0.1 N m
<Unit : mm>
Advertisement
Table of Contents
