Table of Contents
Advertisement
Auto keystone
J
Auto
Always works and corrects keystone
distortion according to the projector's tilt.
Manual
Works only when pressing the <AUTO
SETUP> button on the remote control or
the control panel.
Off
Disables Auto Keystone.
Note
[Input search], [Auto PC adj.] and [Auto Keystone] cannot
z
be set [Off] at the same time.
The [Auto Keystone] function cannot work when the
z
[Ceiling feature] is set [On] in the [Screen] menu.
Background
Select the background screen for when no input signal
is detected.
1 )
Press ▲▼ to select [Background].
2 )
Press the <SELECT> button.
3 )
Press ▲▼ to switch
option as below.
Blue
Blue colored background.
User
The logo transferred by "Logo
Transfer Software *
Black
Black colored background.
*1 :
"Logo Transfer Software" is included on the
supplied CD-ROM.
Display
This function decides whether to display On-Screen
Displays.
1 )
Press ▲▼ to select [Display].
2 )
Press the <SELECT> button.
3 )
Press ▲▼ to switch
option as below.
On
Show all the On-Screen
displays *
Countdown
Show the input image instead
off
of the countdown when turning
on the projector *
Off
Hide the On-Screen Displays *
between each
" is projected.
1
between each
1
2
3
*1 :
Use this function when you want to project
images after the lamp becomes bright enough.
The factory default setting is in this option.
*2 :
Use this function when you want to project the
image as early as possible even when the lamp
is not bright enough.
*3 :
Hide the On-Screen Displays except;
● On-Screen Menu.
● [Power off?]
● [P-timer] display.
● No signal for [Power management].
● [Please wait ...]
● Arrows for the [True] function in the [Screen]
Menu.
Logo
This function allows you to customize the screen logo
with [Logo select], [Logo PIN code lock] and [Logo
PIN code] change functions.
1 )
Press ▲▼ to select [Logo].
2 )
Press ► or the <SELECT> button.
3 )
Press ▲▼ to choose the desired item.
Logo select
J
This function decides on the starting-up display from
among following options.
Off
Show the countdown display only.
Default
Show the factory-set logo.
User
The logo transferred by "Logo
Transfer Software *
*1 :
"Logo Transfer Software" is included on the
supplied CD-ROM.
Logo PIN code lock
J
This function prevents an unauthorized person from
changing the screen logo.
Off
The screen logo can be changed freely
from the [Logo] Menu.
ON
The screen logo cannot be changed
without a [Logo PIN code].
Note
If you want to change the [Logo PIN code lock] setting,
z
press the <SELECT> button and the [Logo PIN code]
dialog box appears. Enter a [Logo PIN code] by following
the steps below. The initial [Logo PIN code] is set to
"4321" at the factory.
Setting
1
" is projected.
47
ENGLISH -
Advertisement
Table of Contents
