Standby(R)/On(G) Indicator - Panasonic PT-LX22E Operating Instructions Manual

Powering ON/OFF

STANDBY(R)/ON(G) indicator

The <STANDBY(R)/ON(G)> indicator informs you the status of the power. Confirm the status of the
<STANDBY(R)/ON(G)> indicator before operating the projector.
STANDBY(R)/ON(G) indicator
Indicator status
No illumination or flashing
RED
Flashing
GREEN
Flashing
24
- ENGLISH
The power cord is unplugged.
The power cord is plugged.
Lit
The projector is in stand-by mode, after the cooling is completed.
The projector cannot be turned on until the normal power-off processing for fan
cooling is completing and the <STANDBY(R)/ON(G)>indicator stops blinking.
The temperature inside the projector is abnormally high. And the <WARNING>
indicator also blinks in red.
cooling is completing and the <STANDBY(R)/ON(G)> indicator stops blinking.
Lit Projecting.
The projector is in the Power management mode.
Status
The projector cannot be turned on until
( Æ page 54)