Replacement
Resetting the Filter Counter
J
Be sure to reset the [Filter counter] after replacing the filter. (
Attention
Turn off the power before you replace the air filter unit.
z
When attaching the air filter unit, make sure that the projector is stable, and work in an environment that is
z
safe, even in the event of the air filter unit dropping.
Do not operate the projector with the filter removed. Dust may accumulate on the optical elements degrading
z
picture quality.
Do not put anything into the air vents. Doing so may result in malfunction of the projector.
z
Do not wash the filter with water or any other liquid matter. Otherwise the filter may be damaged.
z
Attaching the Filter Cover to the Projector
J
The supplied filter cover is designed for preventing dust accumulation on the filter when mounting the projector on
the ceiling.
1 )
Turn over the projector.
2 )
Press the adjustable foot lock latch and pull out the adjustable foot, and then attach
the filter cover (supplied) to the projector (
). And tie the string around the adjustable foot as Picture (1) shown.
shown
3 )
Press the adjustable foot lock latch and pull in the adjustable foot.
4 )
Attach the projector to the ceiling mount in accordance with the instruction manuals
which come with the ceiling mount as Picture (2) shown.
.
Attention
If the Projector Mount Base ET-PKL100B is applied, the supplied filter cover is unnecessary.
z
56
- ENGLISH
Picture (1)
page 52 " Filter counter reset")
Æ
Push the cover in the arrow direction as the Picture (1)
To Ceiling Mount
Picture (2)
Filter Cover
(supplied)
Projector