Hardware Installation - Vivotek SF8174 Quick Installation Manual

3

Hardware Installation

First, open the dome cover by pressing the release button. You may squeeze the opposite edge of
the dome cover if the dome cover does not come off easily. Then, follow the steps below to install the
camera to either a ceiling or a wall.
Slide cover
Release button
If you plan to route cables from the side of camera,
remove the rubber slide cover from the dome cover.
Connecting Ethernet Cable
& the Power and IO Cable
Connect the supplied power & IO cables if your switch
J6
does not support PoE. Connect the white header
connectors to J6 and J7 on the camera.
J7
Power & IO Cable
EN - 3