Auxiliary Function Selection - Beko WMB 710311 D User Manual

Auxiliary function selection

Select the desired auxiliary functions before
starting the programme. Furthermore, you
may also select or cancel auxiliary functions
that are suitable to the running programme
without pressing the Start / Pause button
when the machine is operating. For this,
the machine must be in a step before the
auxiliary function you are going to select or
cancel.
If the auxiliary function cannot be selected
or canceled, light of the relevant auxiliary
function will blink 3 times to warn the user.
C
Some functions cannot be selected
together. If a second auxiliary function
conflicting with the first one is selected
before starting the machine, the function
selected first will be canceled and the
second auxiliary function selection will
remain active. For example, if you want
to select Quick Wash after you have
selected the Prewash, Prewash will be
canceled and Quick Wash will remain
active.
C
An auxiliary function that is not
compatible with the programme cannot
be selected. (See "Programme and
consumption table")
C
Auxiliary Function buttons may vary
according to the model of the machine.
• Prewash
A Prewash is only worthwhile for heavily
soiled laundry. Not using the Prewash will
save energy, water, detergent and time.
C
Prewash without detergent is
recommended for tulle and curtains.
• Quick Wash
This function can be used in Cottons and
Synthetics programmes. It decreases the
washing times and also the number of rinsing
steps for lightly soiled laundry.
C
When you select this function, load
your machine with half of the maximum
laundry specified in the programme table.
• Rinse Plus
This function enables the machine to make
another rinsing in addition to the one already
made after the main wash. Thus, the risk
for sensitive skins (babies, allergic skins,
etc.) to be effected by the minimal detergent
remnants on the laundry can be reduced.
• Anti-Creasing
This function creases the clothes lesser when
they are being washed. Drum movement
is reduced and spinning speed is limited to
prevent creasing. In addition, washing is done
with a higher water level.
• Rinse Hold
If you are not going to unload your clothes
immediately after the programme completes,
you may use rinse hold function to keep your
laundry in the final rinsing water in order to
prevent them from getting wrinkled when
there is no water in the machine. Press Start /
Pause button after this process if you want to
drain the water without spinning your laundry.
Programme will resume and complete after
draining the water.
If you want to spin the laundry held in water,
adjust the Spin Speed and press Start /
Pause button.
The programme resumes. Water is drained,
laundry is spun and the programme is
completed.
Delayed Start
With the Delayed Start function the startup
of the programme may be delayed up to 19
hours. Delayed start time can be increased
by increments of 1 hour.
C Do not use liquid detergents when you
set Delayed Start! There is the risk of
staining of the clothes.
1. Open the loading door, place the laundry
and put detergent, etc.
2. Select the washing programme,
temperature, spin speed and, if required,
the auxiliary functions.
3. Set the desired time by pressing the
Delayed Start button.
4. Press Start / Pause button. The delayed
start time you have set is displayed.
Delayed start countdown starts. "_"
symbol next to the delayed start time
moves up and down on the display.
C
Additional laundry may be loaded during
the delayed start period.
5. At the end of the countdown, duration
of the selected programme will be
displayed. "_" symbol will disappear and
the selected programme will start.
Changing the Delayed Start period
If you want to change the time during
countdown:
1. Press Delayed Start button. Time will
increase by 1 hour each time you press
the button.
2. If you want to decrease the delayed
start time, press Delayed Start button
repeatedly until the desired delayed start
time appears on the display.
20
EN