Panasonic NV-GS320 Operating Instructions Manual page 72

Card
1: Recorded pictures are not clear.
• Have you set [BASIC] >> [PICT.QUALITY] >>
[ ]? If recording is done with it set to [
pictures with fine details may include a mosaic-
like pattern. Set [PICT.QUALITY] >> [
2: A file recorded on a card cannot be deleted.
• Is the file protected? Protected files cannot be
deleted. ( )
-45-
• For the SD Card, if its write protect switch is set
to [LOCK], then deletion is disabled. (
3: Photoshot playback images do not look
normal.
• The picture may be damaged. In order to
prevent the loss of image data, backing up on a
cassette or a personal computer is
recommended.
4: Even if a card is formatted, it cannot be
used.
• Either the movie camera or the card may be
damaged. Please consult a dealer. Use an SD
Card from 8 MB to 4 GB with this unit.
5: During playback, [UNPLAYABLE CARD] is
displayed.
• The image was either recorded in a different
format, or data is damaged.
6: If the SD card is inserted in another device,
it is not recognized.
• Check that the device is compatible with the
capacity or type of SD card (SD Memory Card/
SDHC Memory Card) that you inserted. (
Refer to the operating instructions of the device
for details.
72
VQT1A45
Others
Others
1: The indication disappears, the screen is
frozen, or no operation can be performed.
], • Turn off the power to the movie camera. If the
power cannot be turned off, press the [RESET]
]. ( ) button, or detach the battery or AC adaptor and
-28-
then reattach it. After that, turn on the power
again. If normal operation is still not restored,
detach the power connected, and consult the
dealer who you purchased the movie camera
) from.
-16-
2: "PUSH THE RESET SWITCH" is displayed.
• An irregularity in the movie camera has been
automatically detected. Remove the cassette
or the card for data protection and then press
the [RESET] button with the boss A. The
movie camera will be activated.
• If you do not press the [RESET] button, the
power to the movie camera is turned off
)
-16-
automatically about 1 minute later.
• Even after you press the [RESET] button, the
indication may still appear repeatedly. If so, the
movie camera needs repair. Detach the power
connected, and consult the dealer who you
purchased the movie camera from. Do not
attempt to repair the appliance by yourself.
RESET
A