Panasonic NV-GS320 Operating Instructions Manual page 58

With DV cable (optional)
1
Set the movie camera to tape recording
mode or tape playback mode.
≥You cannot use SweetMovieLife in tape
recording mode.
2
Connect the movie camera to personal
computer with auxiliary DV cable.
1)
2)
1) DV cable
2) DV terminal
3
Select [start] >> [All Programs (Programs)]
>> [Panasonic] >> [SweetMovieLife 1.0E]/
[MotionDV STUDIO 5.6E LE for DV] >>
[SweetMovieLife]/[MotionDV STUDIO LE for
DV].
≥You can record the video edited by the PC onto
the tape in the movie camera.
58
VQT1A45
With a PC
ª
Using the movie camera as a Web
Camera
(Windows XP SP1/SP2, Windows 2000
SP4)
To upgrade Windows XP to SP2, click [start] >>
[All Programs (Programs)] >> [Windows Update].
If the movie camera is connected to your personal
computer, you can send video and sound from
the movie camera to the other parties via the
network. Audio may also be exchanged if the
personal computer is configured accordingly.
(You can use the microphone equipped with the
personal computer instead of the one on the
movie camera.)
≥Refer to page
-53-
requirements.
Connecting the movie camera to personal
computer (For using as a Web Camera)
1
Install USB Driver. (
2
Set the movie camera to tape playback
mode or tape recording mode.
3
Set [BASIC] or [ADVANCED] >>
[USB FUNCTION] >> [WEBCAM].
4
Connect the movie camera to personal
computer with auxiliary USB cable.
1)
2)
1) USB cable
2) USB terminal
3) The Web Camera mode screen
for the minimum
)
-54-
3)