Self-Timer Recording; Wide/4:3 Function - Panasonic NV-GS320 Operating Instructions Manual

Hide thumbs Also See for NV-GS320:
Table of Contents

Advertisement

Available languages

Available languages

Self-timer recording

You can record still pictures on a card using the
timer.
≥Set to Card Recording Mode.
1
Press the joystick to display the icon. Move
the joystick down until icon 1 appears.
2
Move the joystick left to select the self-timer
recording icon [
≥The [SELF-TIMER ON] indication appears on
the screen of the movie camera.
3
Press the [
] button.
≥After the [
] indication flashes for
approx. 10 seconds, recording will start. After
recording, the self-timer will be cancelled.
≥If you press the [
fully, the subject is focused when the button is
pressed halfway.
≥When you press the [
subject is focused just before recording.
ª
To stop the timer midway through
Press the [MENU] button.
≥The self-timer standby mode is cancelled when
you turn off the power or operate the mode dial.
34
VQT1A45
Record mode
].
1
] button halfway and then
] button fully, the

Wide/4:3 Function

This allows you to record images compatible with
wide-screen TVs.
Wide Function
Images are recorded with a 16:9 aspect ratio.
4:3 Function
Images are recorded with a 4:3 aspect ratio.
≥Set to Tape/Card Recording Mode.
1
Wide Function
Set [BASIC] >> [REC ASPECT] >> [16:9].
4:3 Function
Set [BASIC] >> [REC ASPECT] >> [4:3].
ª
To Cancel the Wide/4:3 Function
Wide Function
Set [BASIC] >> [REC ASPECT] >> [4:3].
4:3 Function
Set [BASIC] >> [REC ASPECT] >> [16:9].
≥The default setting is [16:9].
≥In the wide-screen mode, the menu screens,
operation icons and other screen displays
appear horizontally oriented.
≥When images are played back on a TV screen,
the date/time indication may be erased in some
cases.
≥Depending on the TV, the picture quality may
deteriorate.
≥If still pictures recorded with a 4:3 aspect ratio
are played back when [TV ASPECT] is set to
[16:9], part of the operation icons and other
displays will appear on the black bands on the
left and right of the picture.
≥Concerning the TV to be connected and TV
used for playback.
≥When playing back images taken by this unit
on a TV screen, change the setting
established by Tape/Card playback mode
[SETUP] >> [TV ASPECT] to match the
aspect ratio (4:3 or 16:9) of the TV monitor to
be connected. (
)
-42-
≥Depending on the settings of the TV
connected, the images may not be displayed
properly. For more information, please read
the operating instructions for the TV.

Advertisement

Chapters

Table of Contents
loading

Table of Contents