Panasonic NV-GS320 Operating Instructions Manual page 61

ª
Using on Macintosh
Operating environment on iMovie 4/iMovie HD
OS:
With pre-installed;
Mac OS X v10.3 to 10.4
CPU:
PowerPC G3 (400 MHz or higher), G4, G5
Intel Core Duo
Intel Core Solo
Interface:
DV (FireWire) terminal (IEEE1394.a)
≥Supplied CD-ROM is available for Windows
only.
≥iMovie/iMovie HD, included with any new
Macintosh or sold with iLife.
≥For more information, please contact Apple
Computer, Inc. at
http://www.apple.com.
Copying still pictures on PC
OS:
With pre-installed;
Mac OS X v10.3 to 10.4
1
Connect the movie camera to the personal
computer via the supplied USB cable.
2
Double-click [NO_NAME] or [Untitled]
displayed on the desktop.
≥Files are stored in [100CDPFP] folder in the
[DCIM] folder.
3
Using a drag-and-drop operation, move the
pictures you want to acquire or the folder
storing those pictures to any different
folder on the personal computer.
To disconnect USB cable safely
Drag [NO_NAME] or [Untitled] disk icon to the
[Trash], and then disconnect the USB cable.
With a PC
ª
Notes
≥Do not disconnect USB cable while the status
indicator of the movie camera is on. It may
freeze the software or destroy the data in
transfer.
≥When the movie camera is switched to the PC
connection mode while it is connected to the
personal computer, the operation mode of the
movie camera cannot be switched. In this case,
disconnect the USB cable. Switch the operation
mode of the movie camera and reconnect the
cable.
≥If the movie camera is used as a Web Camera,
the quality of the video to be exchanged will
depend on the Internet connection status.
≥In the Web Camera mode, video (picture)
cannot be recorded onto a tape or a card.
≥In the Web Camera mode, the audio may be
interrupted in the midway of communication
depending on the communication environment
or the performance of the personal computer.
≥If you connect the USB cable while you operate
a tape in the tape playback mode, the tape will
be stopped.
≥If you connect the USB cable in the Web
Camera mode (tape recording mode), the time
code indication, the SP/LP indication, or icons
disappear.
≥In the Web Camera mode (tape playback
mode), the operation icon is changed.
≥If the movie camera is used as a Web Camera
while virus checking software is running, the
movie camera's operation may stop midway
through. In this case, exit the Messenger,
reconnect the movie camera and restart the
Messenger.
≥We recommend using AC adaptor as the power
source for the movie camera when connecting
to the personal computer. Data may be lost if
the battery power is lost while transferring.
≥Do not delete the folders in a card. The card
may not be recognized if deleted.
≥If you install the USB Driver while the USB cable
is being connected, or if you don't follow these
operating instructions, the movie camera will not
be recognized correctly. In this case, delete the
driver from [Device Manager] as described
below, uninstall the driver, and re-install it.
Set the movie camera to tape recording mode,
tape playback mode or PC connection mode,
connect it to the personal computer, and delete
[DVC] or [Web-Camera] from [Device Manager].
61
VQT1A45