Panasonic NV-GS320 Operating Instructions Manual page 55

2
Click [SweetMovieLife 1.0E].
≥After reading the displayed contents, please
carry out the installation according to
instructions.
3
Select the video system.
4
After the completion of setup, click on
[Finish].
≥Sample data is installed concurrently with the
SweetMovieLife.
ª
Installing MotionDV STUDIO 5.6E LE
MotionDV STUDIO allows more advanced editing
than SweetMovieLife. Using this software allows
you to capture video recorded on a tape or
images viewed through the lens of a camera.
Connecting the movie camera with the DV cable
allows you to output images edited on a personal
computer to a tape in a movie camera. You can
also add a wide variety of special effects such as
fade, transition and titles.
DirectX 9.0b is installed in your PC if it is not
installed beforehand. Applications which are
compatible with older version of DirectX may not
operate properly by installing DirectX 9.0b. In this
case, consult the manufacturers of the
applications disabled.
With a PC
≥When you use Windows 2000 (SP4) to connect
the personal computer and the movie camera
by USB cable and then use MotionDV STUDIO,
installing the USB driver is needed.
1
Insert the supplied CD-ROM into the
personal computer's CD-ROM drive.
≥Quit all applications.
≥The [Setup Menu] screen appears.
2
Click [MotionDV STUDIO 5.6E LE].
≥After reading the displayed contents, please
carry out the installation according to
instructions.
3
Select the video system.
4
After the completion of setup, click on
[Finish].
≥Sample data is installed concurrently with the
MotionDV STUDIO.
ª
Connecting the movie camera to
personal computer
Confirmation before connection
(for Windows XP/2000)
When you connect the personal computer and the
movie camera with the USB cable and then use
SweetMovieLife/MotionDV STUDIO on Windows
XP (SP2) or Windows 2000 (SP4), check the
driver of the USB host controller.
55
VQT1A45