Table of Contents
Advertisement
1-1-3.
Precaution
1. Setting the Switch
Unless otherwise specified, set the switches as follows and per-
form adjustments.
1. POWER switch (Control switch block) .............. ON
2. BACK LIGHT switch (Control switch block) .... OFF
3. PROGRAM AE dial (Control switch block) ....... AUTO
2. Order of Adjustments
Basically carry out adjustments in the order given.
H
A B
A=B
Fig. a (Video output terminal
output waveform)
3. Subjects
1)
Color bar chart (Standard picture frame).
When performing adjustments using the color bar chart, ad-
just the picture frame as shown in Fig. 5-1-4. (Standard pic-
ture frame)
2)
Clear chart (Standard picture frame)
Remove the color bar chart from the pattern box and insert a
clear chart in its place. (Do not perform zoom operations
during this time.)
0 ± 0.1msec
V
B A
Enlargement
Difference in level
A
B
Fig. 5-1-4
Electronic beam scanning frame
Fig. b (TV monitor picture)
Direct the camera toward the subject and place the
subject with the distance (about 40 cm) from camera
until the specified picture frame fills the monitor dis-
play as shown in Fig. a and Fig. b.
5-3
CRT picture frame
Advertisement
Table of Contents
