Table of Contents
Advertisement
FIRST-TIME SETUP CONTINUED
20
29
31
Copyright of Primus Inc. 2018
30
28
PRIMUS MANUAL 500-55N9-01
LOCATING, LEVELING, AND FINAL SETUP
1.
Select a location that is indoors, out of direct sunlight,
and climate controlled. Excessive moisture/humidity
can cause long-term damage to your game.
2.
Use a pinball to roll down the center of the playfield for
side-to-side leveling, or use an external bubble level,
digital level, or smartphone level app.
3.
Plug into a grounded outlet and check for proper
operation through DIAGNOSTICS.
4.
Check the coin door: With the door closed, insert coins
to verify proper operation.
5.
Play game: Check for satisfactory operation and adjust
game volume (push the Red Buttons inside the Coin
Door).
6.
If desired, perform any game diagnostics, game
adjustments, and pricing settings at this time.
PLAYFIELD REMOVAL
The playfield is held in place by two basset clamps located on
each side on the game.
1.
Loosen the basset clamps by lifting them away from
cabinet.
2.
Lift the playfield and pull toward you.
3.
Tilt up and rest the playfield against the backbox if
necessary.
PLAYFIELD INSTALLATION
1.
If the playfield has been completely removed, set the
playfield on the wood rails in the base cabinet.
2.
Ensure the cables are reconnected correctly.
3.
Slide the playfield forward into the base cabinet until it
stops.
4.
Latch the basset clamps on each side of the base
cabinet.
28
SETUP AND MOVING
31
5
Advertisement
Table of Contents
