Clock Setting - Toshiba ML2-EC10SA Instruction Manual

OPERATION INSTRUCTION
This oven uses modern electronic control to adjust cooking parameters to meet
your needs better for cooking.
• Before operating your new microwave oven make sure you read and understand
this Use and Care Guide completely. The Microwave Oven is for food preparation only.
ALWAYS have food in the Microwave Oven when it is on to absorb the microwave
energy. Stay near the oven while it's in use and check cooking progress frequently so
that there is no chance of overcooking food.
Follow these procedures:
Plug in the oven. Close the door. The oven display will show 0:00, Oven goes into
standby mode.

1.Clock Setting

• Suppose you want to enter the correct time of
day 12min 30sec.
Step
1. Touch Timer/Clock twice.
leftmost "00" flashing
2. Enter the correct time of
day by turning the
to adjust the hour figures,
The input time should be
within 1--12 (12-hour).
Input "12" at this step.
3. Touch Timer/Clock again.
the minute figures will flash.
4. Turn
minute figures. The input time
should be within 0--59.
Input " 30 " at this step.
5. Confirm with Timer/Clock .
Procedure
Touch/Display
to adjust the
00 : 00
I2 : 00
I2 : 30
EN-21
NOTE
Your Microwave Oven can
be programmed with the
door open except for
+30Sec and Odor Removal.
If you enter an incorrect clock
time, simply touch
Cancel and re-enter the the
correct time of day. Electrical
power supply to your
Microwave Oven should not
be interrupted. If this occurs
during cooking, the program
will be erased. The time of
day will also be erased.
In the process of setting the
hour figures, if you do not
turn rotary coding switch, it
will switch to the kitchen
timer function and the clock
setting will be invalid.
Start/
Stop/