Toshiba ML2-EC10SA Instruction Manual page 15

SETTING UP YOUR OVEN
TURNTABLE INSTALLATION
Cleaning the cooking compartment and putting the turntable in place. For new
installations, make sure all packaging and shipping tape has been removed from the
turntable shaft. Before using the appliance to prepare food for the first time, you will
need to put the turntable in place correctly. You must clean the cooking compartment
and accessories.
How to put the turntable in place
1. Place the roller ring
2. Place the glass tray
center of the glass tray bottom between the three spokes of the shaft. Make sure
that the turntable
cooking compartment floor. The rollers on the shaft should fit inside the turntable
bottom ridge.
Hub (underside)
into the recess in the cooking compartment.
b
on the turntable ring. Fit the raised, curved lines in the
a
engages in the turntable shaft
a
d
EN-14
INSTRUCTION FOR USE
in the centre of the
c
a
Glass tray
b
Turntable ring
c
Turntable shaft & Hub