Hyundai Ioniq Hybrid 2017 Owner's Manual page 498

5. Remove the rear combination
lamp assembly from the body of
the vehicle.
Turn signal lamp
OAE076038
6. Remove the socket from the
assembly by turning the socket
counterclockwise until the tabs on
the socket align with the slots on
the assembly.
7. Remove the bulb from the socket
by pressing it in and rotating it
counterclockwise until the tabs on
the bulb align with the slots in the
socket. Pull the bulb out of the
socket.
8. Insert a new bulb by inserting it
into the socket and rotating it until
it locks into place.
9. Install the socket in the assembly
Stop/tail lamp
10. Reinstall the lamp assembly to
OAE076039
by aligning the tabs on the socket
with the slots in the assembly.
Push the socket into the assembly
and turn the socket clockwise.
the body of the vehicle.
7
7-77