Hyundai Ioniq Hybrid 2017 Owner's Manual page 267

Multimedia System
i Information
- Using the iPod ® Devices
• To use the audio system's iPod
trol function, use the dedicated
cable provided with your iPod
• Connecting the iPod ® to the vehicle
during play may result in a loud
noise that lasts about one to two sec-
onds. Connect the iPod ® to the vehi-
cle after stopping or pausing play.
®
• Connect the iPod with the vehicle in
the ACC ON state to begin charging.
• When connecting the iPod
be sure to fully push the cable into
the port.
• When EQ effects are enabled simul-
taneously on external devices, such
as iPod ® s and the audio system, the
EQ effects may overlap, causing
sound quality deterioration or dis-
tortion. Deactivate the EQ function
for all external devices, if possible.
• Noise may occur when your iPod
or the AUX port is connected.
Disconnect and store separately
when not in use.
(Continued)
4-26
(Continued)
• There may be noise if the audio sys-
tem is used with an iPod
® con-
external device connected to the
power jack. In these cases, discon-
® .
nect the iPod
from the power jack.
• Play may be interrupted, or device
malfunctions may occur depending
on the characteristics of your
® ®
iPod /iPhone
• Play may fail if your iPhone
nected through both Bluetooth
® cable,
USB. In this case, select Dock con-
nector or Bluetooth
®
iPhone to change the sound output
settings.
• If your software version does not
support the communication proto-
col or your iPod
due to device failure, anomalies or
defects, iPod ®
• iPod ® nano (5th generation) devices
®
may not be recognized if the battery
is low. Charge sufficiently before use.
(Continued)
• The search and song play order in
® or AUX the iPod
from the search order in the audio
system.
® or external device
• If the iPod
internal defect, please reset the
iPod
• Depending on the software version,
the iPod
.
system. If the media is removed or
®
is con- disconnected before recognition, the
®
and previous mode may not be restored
(iPad
®
on your
• Cables other than the 1-meter cable
provided with iPod
ucts may not be recognized.
• When other music apps are used on
your iPod
® is not recognized
tion may fail due to malfunction of
the iPod
mode cannot be used.
(Continued)
® device may be different
®
has failed due to an
® ®
(consult your iPod manual).
®
may fail to sync with the
®
cannot be charged).
® /iPhone ® prod-
® , the system sync func-
® application.