GENERGY VULCANO Instructions For Use Manual page 67

3 Adjusting the welding amperes
VULCANO Model: Turn the power switch to the right to increase the welding
power and counterclockwise to reduce it, you can select from the following: 45-60-
75-90-105-120Ah.
VULCANO MODEL
Models TEIDE - TIMANFAYA: First, you must use the high/low intensity switch
selector to adjust the intensity as needed:
• Select low intensity (left) for powers from 40 to 110Ah.
• Select high intensity (right) for powers from 120 to 190Ah.
Once selected low or high intensity, turn the power switch to the right to increase
the welding power and to the left to decrease.
MODEL TIMANFAYA - TEIDE
WELDING POWER SWITCH
SELECTOR HIGH/LOW INTENSITY
WELDING POWER SWITCH
25