Section 3: Using The Wiced Smart Ide; Build And Load A Sample Application - Broadcom WICED Smart Quick Start Manual

WICED Smart Quick Start Guide
S e c t i o n 3 : U s i n g t h e W I C E D S m a rt I D E
This section describes how to:
• Use the WICED Smart IDE to create application build targets for the WICED Smart tag.
• Download applications to the tag.
• Select the power supply for the tag.
• Verify that the application running on the tag is working correctly using an iOS or Android mobile device
with support for Bluetooth Low Energy.
If a Bluetooth Low Energy capable iOS or Android mobile device is not available,
with Windows 8" on page 22
tag. You can also use a Windows 7 PC equipped with a Broadcom chip or with a Broadcom chip-based
Bluetooth 4.0 dongle.

Build and Load a Sample Application

Start the WICED Smart IDE by selecting START > All Programs > Broadcom > WICED Smart IDE. The
WICED Smart IDE looks similar to the screenshot shown in
Broadcom ®
September 24, 2014 • MMPWICED-Smart-QSG203-R
describes an alternate method for testing applications running on the WICED Smart
"Testing a WICED Smart Tag
Figure 2 on page 14.
WICED Smart Development System
Using the WICED Smart IDE
Page 13