1. Open the drawer. Press the catch downwards
as indicated in the picture and pull it out.
2. Remove the top part of the additive
compartment to aid cleaning and flush it out
under running warm water, to remove any
traces of accumulated detergent. After
cleaning, put the top part back into position.
CLEANING THE INLET HOSE AND THE VALVE FILTER
1
2
24
1
3
3. Make sure that all detergent residue is removed
from the upper and lower part of the recess.
Use a small brush to clean the recess.
2
4. Insert the detergent drawer into the guide rails
and close it. Run the rinsing programme
without any clothes in the drum.