Toast Go 2 Manual page 3

Getting Started
After unboxing your new Toast Go 2, follow these steps to
complete initial set up:
1
Ensure the device is fully charged before use.
Press and hold the power button briefly to turn the
2
device on.
3
Connect the device to your Toast Wi-Fi network.
Log into the Toast app using your Toast email and
4
password.
5
Enable EMV to accept dip and tap (contactless)
payments:
On the lower left corner of the passcode screen,
A.
click the credit card icon.
Enter your pin to log in.
B.
From the main menu, go to Setup and select Device Setup.
C.
Scroll down and select EMV Enabled.
D.
Select Yes. You may be prompted to update the card
E.
reader during the process.
3