Perform Initial Settings; Unit Settings; Settings For Remote Monitoring With A Pc; System Diagram - Toshiba BMS-CT1280UL Manual

Touch Screen Controller
5

Perform initial settings

Unit Settings

Have service personnel perform the following work.
1
Check the installation and wiring of the main unit
Follow the installation instructions to complete the installation and wiring work.
2
Check the wiring between the remote controller, indoor unit, and outdoor unit
Check that the address from the remote controller to the Unit is correct, and switch ON/OFF, Cool/Heat and
confirm that operation is normal.
3
Create a local setting file with the setting file creation software
Input necessary information based on local air conditioner information and display language settings, etc. into
a PC on which the setting file creation software is installed to create a local settings file.
4
Upload the local settings file
Connect the Unit to the PC via LAN and upload the local settings file.
While uploading, the Unit restarts.
5
Confirm the setting contents
Check that the screen display of the Unit is set according to the local settings file, perform ON/OFF, and
confirm that the Unit operated on the screen matches the Unit that actually starts to operate.

Settings for Remote Monitoring with a PC

You can monitor and control the Unit by accessing it from a PC. This section explains the settings for the Unit and the PC. Please
see "9. Remote monitoring using a PC" (P.74) for the system diagram and the PC operating environment.
● NOTE
Some functions cannot be used from a PC. For details, please see "List by Lock Level/Level" (P.84)

System diagram

LAN
Owner's Manual
Use one LAN line to connect
up to 128 indoor units
21- EN