qian.mx XIAO PC User Manual page 58

Hard disk: Set it never turn off the hard disk in sleep mode.
If you are running XP: Open the Control Panel and switch to Classic View
(if not already selected), Select Power Options and adjust the settings in
the power scheme, select never turn off hard disks,choose ok to save your
changes.
Once keep your Hard disk always wake, you can wake up the mini pc di-
rectly by moving your mouse or touch the keyboard directly.
F: Power indicator light is not on after Eglobal mini computer(install
RAM and SSD well) connect with power adapter
A: Try to use a new power adapter 12V to test the mini computer
F: Power indicator light is on but display nothing after Eglobal mini
computer(install RAM and SSD well) connect with power adapter
A: 1. Make sure the VGA Cable/HDMI cable between the PC and display
is well connected.
2. If that doesn't work, change a VGA/HDMI cable for trial.
3. Make sure the memory you use is the same kind as per Eglobal mini
computer requirement.
4. Close the power and try to open the mini computer case carefully, check
if the memory plugged correct or loose, unplug the memory and wipe it up
by nonwovens then insert it on the mini computer, connect power adapter
and re-start it.
5. sometimes the problem comes due to CMOS battery problem, the
CMOS battery remember some error information and make the computer
58