About Hd Pro Mark Ii Camera - Wheel Witness WheelWitness HD PRO Mark II User Manual

About HD PRO Mark II Camera

The HD Pro Mark II is designed to automatically turn ON when it
receives power to the DC IN port. It also automatically shuts down
and records for a second when the power is shut off (to avoid any
sudden power cuts and possibly corrupting data). Under default
settings the camera always cycles or "loops" the memory card so you
will always be recording and never run out of space.
Motion Sensor function should remain OFF under normal
operating conditions. It is intended to be used ONLY when
the vehicle is stationary and would interfere with normal camera
operation while driving. Please only change the settings as required!
The G sensor function can be used to protect files in the event of an
incident, however if you have too many false- positives, or the
camera freezes, please make sure to turn it off!
If you have any questions, please contact us!
8