FFS Brands VI014HHC Manual page 7

The runner assembly can now be lifted away from the inner side of the machine, Fig 3.
Fig.4 shows the inside of the machine with the runner assembly removed.
The water tray used in the humidified holding cabinets consists of a tray with a cover plate.
Fig. 3 Fig. 4
Fig. 5
The cover plate has a sliding adjustable vent to control the amount of water evaporation.
See Fig. 5. Set to the middle position, and slide open or closed of more or less moisture is
required.
For normal operation the factory setting of the holder is 75C
Temperature / Humidity characteristics
If the temperature of the holder is changed then the characteristics of the unit will change
too. Typically the humidity will be affected by changes to the temperature.
If the temperature is altered then experimentation will be required to see what water levels
(if any) are required, as well as the position of how open or closed the vents are.
7