Gaggenau AR 403 722 Installation Instruction page 6

9 IMPORTANT SAFETY INSTRUCTIONS
READ AND SAVE THESE INSTRUCTIONS
9
WARNING
Risk of electrical shock or fire!
Frame grounded to neutral through a
ground strap. Grounding through the
neutral conductor is prohibited for
new branch-circuit installations
(1996 NEC), mobile homes, and
recreational vehicles, or in an area
where local codes prohibit
grounding through the neutral
conductor.
For installations where grounding
through the neutral conductor is
prohibited,
disconnect the link from the
1.
neutral,
use grounding terminal or lead to
2.
ground unit,
connect neutral terminal to lead
3.
branch circuit neutral in usual
manner (when the appliance is to
be connected by means of a cord
kit, use a UL listed 4-conductor
cord for this purpose).
9
WARNING
Before you plug in an electrical cord
or turn on power supply, make sure
all controls are in the OFF position.
If required by the National Electrical
Code (or Canadian Electrical Code), this
appliance must be installed on a separate
branch circuit.
6
9
WARNING
To reduce the risk of fire or electric
shock, do not use this fan with any
solid-state speed control device.
Installer – show the owner the location of
the circuit breaker or fuse. Mark it for
easy reference.
Before installing, turn power OFF at the
service panel. Lock service panel to
prevent power from being turned ON
accidentally.
9
WARNING
TO REDUCE THE RISK OF FIRE,
ELECTRIC SHOCK, OR INJURY TO
PERSONS, OBSERVE THE
FOLLOWING:
Use this unit only in the manner
▯
intended by the manufacturer. If
you have questions, contact the
manufacturer.
Before servicing or cleaning unit,
▯
switch power off at service panel
and lock the service
disconnecting means to prevent
power from being switched on
accidentally.
When the service disconnecting
means cannot be locked, securely
fasten a prominent warning
device, such as a tag, to the
service panel.