Assembling And Installing Twin Turbo G2 Fall Protection System (With Optional Harness D-Pad Clip) - Honeywell Miller Twin Turbo G2 Connector User Instruction Manual

4.2 Assembling and Installing Twin Turbo G2 Fall
Protection System (with optional Harness D-Pad Clip)
Open webbing retainer clip and slide to the side.
Hook connector through the D-pad retainer clip tube located underneath the webbing.
For proper orientation of the system, insert connector from the left side as shown.
and the gate of the connector on the lower end.
User Instr u cti o n s - En g l i s h
Step 1
Step 2
Step 3
7