D-Link DSM-G600 Install Manual page 17

Configuration (continued)
If you select WEP, enter the same encryption
settings as your wireless router or access
point.
Security Mode - Select WEP.
Authentication
Encryption Mode
encryption (64 or 128-bit).
Key Format - Select Hex or ASCII.
Default Key - Select which key you want
to use.
Key (1-4) - Enter your WEP key. You may
enter up to 4 different keys.
Click Next.
If you select WPA-PSK, enter the same
encryption settings as your wireless router
or access point.
Security Mode - Select WPA-PSK.
Pre-Shared Key - Enter the WPA passphrase
used on your network.
Click Next.
For more information on WEP and WPA security, please refer to section on
Wireless Security in your manual located on the D-Link CD-ROM.
Skip to page 20 to continue your Client setup.
- Select Open or Shared.
- Select the level of
Installing the Hard- Configuration
17