Technical Data; Rating Data; Conditions For Use - MANDREL welder RSX01 Instruction Manual

4 TECHNICAL DATA

4.1 RATING DATA

Voltage
Frequency
R/min
Power
Vibration EN 60745
Dimension
Weight
The motor is supplied without current limitation, therefore the unit must not be
used in continuous operation. The unit may therefore operate permanently in the
overload range and damage due to overheating cannot be excluded!
The specified vibration value was measured using a standardised test procedure. It
can be used to compare products or for an initial assessment of the exposure.
Vibration emissions may differ from the specified value depending on how the device is
used. Operators must be protected by defined safety measures based on the estimated
exposure under actual operating conditions.

4.2 CONDITIONS FOR USE

Temperature range during
operation
Relative Humidity
10
230V / 115V AC ± 10%
50...60 Hz
3.500 - 15.000 (step 1 - 6)
500 W
0,5 m/s , K = 1,5 m/s
2
295 x 111 x 100 mm
approx. 2,5 kg
0°...+50°C
95 % at 10°C
2