Advertisement
6. Connect the AC power cord to the HX620W/HX520W and turn on
the HX620W/HX520W by pushing the switch to "I" position.
Congratulations! You have completed installation of the HX620W/HX520W power supply
and your system is ready to go!
Step B: Replacing your existing power supply
1. Disconnect the AC power cord from your wall outlet or UPS and from the
existing power supply.
2. Disconnect all the power cables from your video card, motherboard and
all the other peripherals.
3. Follow the direction in your chassis manual and uninstall your existing power supply.
4. Go to Step A.
■ Safety and Agency Approvals
CE
EN55022:1998/A1:2000/A2:2003 CLASS B EN 61000-3-2:2000,
EN 61000-3-3:1995/A1:2001 EN55024:1998/A1:2001/A2:2003
FCC
FCC Part 15 & Part 2 (CISPR 22 CLASS B)
C-TICK
AS/NZS CISPR 22:2002 CLASS B
UL
UL 60950-1
CSA
CSA C22.2 NO. 60950-1
TUV
EN 60950-1
CB
IEC 60950-1
■ Warnings
• Due to high voltages inside the power supply, under no circumstances should the
power supply cover be removed. Warranty is voided once the cover is removed.
• Please operate the power supply in a safe and dry environment.
• Do not insert any objects into the open ventilation or fan grill area of the
power supply.
• Please use ONLY genuine Corsair modular cables with Corsair HX620W/
HX520W Series Power Supply. Third party cables might not be compatible
and could cause serious damage to your system and power supply. The
warranty is voided with the use of third party cables.
• The 24-pin main power connector has a detachable 4-pin connector. This
4-pin connector is not a P4 or ATX 12V connector. Please DO NOT force
this cable in the P4 or ATX +12V socket on the motherboard.
• For indoor use only.
7
Advertisement
